|
Installation Notes:
The surfaces of the digitizer is prone to contamination due to the special surface coating on the glass. We suggest you keep the protective film on the top and bottom surfaces until digitizer is ready for installation. There is no need to remove the films during test. And it is also advisable to wear finger cots when handling the digitizer.
This digitizer is intended to be bonded to the top shell rather than the LCD screen. An adhesive substrate with release liner will facilitate the installation. During installation please take care handling the glass and and flex tail.
Storage Guidelines:
Store the digitizer in a temperature between 50 - 80F. The humidity should be kept under 80%. A desiccating agent may be necessary to reduce humidity.
Do not put weight on the digitizer. Don't bend or compress the flex cable ribbon or the FPC. Store the digitizer away from direct sunlight.
|
